Athon AM 8012 Fluid is an aminofunctional silicone-polyether fluid.
Athon AM 8012 Fluid has been specially developed to feature excellent softening properties. No effect on color tone or solidity on dyed items.
Athon AM 8012 Fluid features extra smooth soft hand. Self emulsifiable product, it is easily diluted in water. It provides a hydrophilic characteristic that can be applied diluted only or in formulations combined with other silicone or organic softeners such as fatty acid esters, paraffin and others according to previous evaluation. Can be applied by Foulard or Exhaust.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon CM 40 Fluid is a fluid composed of Octamethylcyclotetrasiloxane (D4).
Athon CM 40 Fluid is a transparent, clear, odorless and colorless material. The product has no taste, is oily and is not sticky.
Good foamer. Low surface tension with excellent spreading.
Raw material in the manufacturing of polydimethylsiloxane polymers and reactive silicone polymers with OH functionality.
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon MH 900 Fluid is a 100% active material based on polymethylhydrogen siloxane.
•Cure resulting in a resistant film
•Curing time and temperature can be controlled
•Effective at low addition rates
•Can be diluted in solvents to improve dispersion
Water repellent treatment for plaster: Athon MH 900 Fluid is added to the water to be mixed with the gypsum powder for plaster preparation. Good water-repellent properties are obtained by adding 0.2 to 0.5% Athon MH 900 Fluid relative to gypsum powder. The amount of water repellent varies according to the type of gypsum and the gypsum-water mixing ratio.
Treatment of Mineral Fillers: In this case, Athon MH 900 Fluid is used alone or, for example, with 3% glycoltetraoctylene titanate. The polymerization takes place at room temperature. It can be accelerated by heating for a few minutes at 150°C.
CAUTION: Do not take near potash or caustic soda or any other alkaline compound. There is a risk of a violent release of highly flammable products. Likewise, do not use in the presence of alcohols (or solvents containing a significant proportion of them) or other components containing reactive hydrogen atoms (SH, OH …), since the release of hydrogen gas may also occur in such cases.
Water repellent
Release agent
Construction
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 10.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 10.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 1000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH terminated (silanol).
•Athon OH 1000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 1000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Adhesive
Raw material
Industrial Processes
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 956 Additive is a product designed as an additive for formulations of inks, paints, varnishes and leather treatment.
•Siloxane additive that eliminates micro-foam in solvent- based systems and acts as a leveling agent
•Excellent antifoaming efficiency at high temperatures
•Eliminates the micro-foam
•Improves leveling and increases brightness
•Improves risk resistance
•Eliminates micro-foam in solvent-based coatings and maintains the integrity of the film
•Improved leveling in inks without solvent
•Improved leveling in water- and solvent-based wood varnishes
•Improves mar resistance in solvent-based industrial coatings
•Improves dispersion of humid pigments
•Help in the orientation of the pigment in finishes with metallic effect
Paint, Ink & Coating
Leather
Paints and Varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 918 Additive is a product designed as an additive for formulations of paints, inks, varnishes and leather treatments.
Athon AD 918 Additive is a surfactant and surface tension reducer. Improves gloss, lubricity, abrasion resistance, release, anti-locking and other surface properties in paints and coatings.
•Paints and coatings: mar resistance agent, slip additive
•Leather: spreading, lubricity and softness
•Compatible with water, solvent and UV curing coatings systems and with acrylic, alkyd, PU, polyester and epoxy resins, promoting spreading, flowability and leveling, penetration, slippage,
release, as well as mar, abrasion and stain resistance
Paint, Ink & Coating
Leather
Paints and varnishes
Canister 20L
Drum 200L
IBC 1.000L
