Athon OH 1000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH terminated (silanol).
•Athon OH 1000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 1000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Adhesive
Raw material
Industrial Processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 750 Silane is a reactive chemical containing 4 hydrolyzable groups attached to the silicon atom. There are 2 t-butoxy groups and 2 acetoxy groups.
Athon CA 750 Silane is a reactive substance used in the manufacture of acetic cure silicone sealants.
Athon CA 750 Silane is used as a crosslinking agent for acetic cure sealants. It is used with other acetic silanes such as Athon CA 743 Silane and Athon CA 779 Silane to achieve specific properties (such as desired cure rate, adhesion etc.)
Raw material
Adhesive and sealant
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 749 Silane is a reactive chemical containing methyl functionality and 3 hydrolyzable methyl ethyl ketoxime groups bonded to the silicon atom.
Athon CA 749 Silane is a reactive substance used in the manufacture of oxime neutral cure silicone sealants.
Athon CA 749 Silane is used as a crosslinking agent for oxime cure sealants. It can be used alone or in combination with other oxime silanes to achieve specific properties (such as desired cure rate, adhesion, etc.)
In contrast to acid or base cure systems, no primary acid or amine is released during application, but a neutral species, 2-butanoneoxime.
Due to the neutral character of 2-butanoneoxime, oxime sealants can be applied even to corrosion-sensitive substrates such as metals or marbles.
Raw material
Adhesive and sealant
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 80.000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 80.000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 80.000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 70 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 70 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 70 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 50.000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 50.000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 50.000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 20.000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 20.000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 20.000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 3500 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 3500 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 3500 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 744 Silane is a reactive chemical containing epoxy functionality and 2 hydrolyzable methoxy groups attached to the silicon atom.
Athon CA 744 Silane is a epoxy-functional silane with hydrolyzable ethoxyl groups. The epoxy group, or glycidoxy, is reactive with various types of organic polymers, while the methoxy groups promote compatibility and adhesion to inorganic surfaces.
•It is used as a coupling agent and adhesion promoter in a wide range of polymers, such as carboxylated latexes (for example, acrylic and SBR), polyurethane dispersion, polysulfide and epoxy
•Athon CA 744 Silane is specifically suited as an adhesion promoter in water-based systems, providing good water stability and maintaining the product life at pH between 6 and 8.5, which is a differential over other trifunctional silanes
Raw material
Paint, Ink & Coating
Adhesive and sealant
Paints and Varnishes
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 740 Silane is a reactive chemical containing epoxy functionality and hydrolyzable methoxy groups attached to the silicon atom.
•Epoxy-functional silane with hydrolyzable alkoxy groups
•The epoxy group, or glycidoxy group, is reactive with various types of organic polymers
•The alkoxy groups promote adhesion compatibility with inorganic surfaces
•Used as a coupling agent for unsaturated polyester-fiberglass composites
•Coupling agent for polysulfide / polyurethane sealants, eliminating the need for primer application
•Used as an adhesion promoter for water-based acrylic sealants and in epoxy and polyurethane coatings
•Compatible with a wide range of resins and fillers
Raw material
Paint, Ink & Coating
Adhesive and sealant
Paints and Varnishes
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 720 Silane is a reactive chemical containing diamine functionality and hydrolyzable methoxy groups attached to the silicon atom.
•Improves adhesion
•Increases modulus, tensile, flexural and dry compressive strength properties in composites
•Maximizes physical and electrical properties of thermoset and thermoplastic composites. Promotes improved wettability and dispersibility of fillers in the polymer matrix
•Coupling agent to improve adhesion in many plastics, resins and elastomers to inorganic surfaces and materials
•Excellent adhesion promoter by diamino-functional group in many types of adhesives, such as: silicone, epoxy, acrylic, polyurethane and silane-funcionalized polyurethane to inorganic substrates such as metal, glass, etc
•Superior coupling agent in composites and to improve the mechanical properties of rubber or plastics with mineral filler
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Industrial processes
Paints and Varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 711 Silane is a reactive chemical containing monoamine functionality and hydrolyzable ethoxy groups attached to the silicon atom.
•Improves adhesion
•Increases modulus, tensile, flexural, wet and dry compressive strength properties in composites
•Maximizes physical and electrical properties of thermoset and thermoplastic composites. Promotes improved wettability and dispersibility of fillers in the polymer matrix
•Coupling agent to improve adhesion of many plastics, resins and elastomers onto inorganic surfaces and materials
•Very useful for improving mineral filler reinforced rubber properties
•Established additive for casting resins as a coupling agent to provide resistance to moisture and better mechanical properties
•Effective coupling agent to modify functional groups on glass fiber surface during composite sizing process
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Paints and Varnishes
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 0.65 Fluid is the smallest chain volatile linear volatile silicone fluid with the highest evaporation rate, lowest viscosity and lowest surface tension among Athon DM Fluid series fluids.
•Low surface tension
•Highly volatile solvent
Used in formulations of industrial release agents as a component of products for lubrication and desengripantes, in addition to diluent for several applications.
Release agent
Lubricant
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CM 50 Fluid is a fluid composed of Decamethylcyclopentasiloxane (D5).
Athon CM 50 Fluid is a transparentr, clear, odorless and colorless material The product has no taste, is oily and is not stic.
Good foamer. Low surface tension with excellent spreading.
Raw material in the manufacturing of polydimethylsiloxane polymers and reactive silicone polymers with OH functionality.
Raw material
Industrial processes
Household & Autocare
Canister 20L
Drum 200L
IBC 1.000L
Athon CM 40 Fluid is a fluid composed of Octamethylcyclotetrasiloxane (D4).
Athon CM 40 Fluid is a transparent, clear, odorless and colorless material. The product has no taste, is oily and is not sticky.
Good foamer. Low surface tension with excellent spreading.
Raw material in the manufacturing of polydimethylsiloxane polymers and reactive silicone polymers with OH functionality.
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 900 Antifoam is a defoamer based on emulsified organic oils. Does not contain silicone.
•Effective at pH range from 2 to 14
•Great deaeration properties
•Great performance regardless of temperature range
•Free of ethoxylated alkylphenols
•Stable in baths with up to 100g/L of sodium chloride and 100g/L of sodium sulfate (defoamer should only be added with fully dissolved salt)
Athon FB 900 Antifoam is used in textile processes:
•Especially suitable for jet dyeing, but has great performance on other dyeing machines as well.
•Quickly removes air and foam.
•Improves the flow of fabric processing in dyeing on jets and winch becks, especially in processes carried out between 40 and 60°C. •In jet dyeing with vat dyes, it is recommended to add the product with the other auxiliaries approximately 3 minutes before adding the dyestuff.
Pre-dilution:
In most cases, the product should not be used directly in concentrated form. A 10% stock pre- dilution can be prepared as follows:
•Add to 10 parts of Athon FB 900 Antifoam in a container.
• Add little by little 10 parts of water at 20 – 30°C, stirring the paste formed by hand. •Adjust to the final volume, adding the remaining 80 parts of water, shaking manually, until obtaining a homogeneous emulsion. Do not use mechanical agitation or direct steam.
•If the dilution is not used immediately, cream may appear. Therefore, it must be shaken manually before using.
In-Process Use: The optimal amount of defoamer varies depending on the type and amount of foaming substance. Commonly used values using pre-dilution of the product to 10% follow.
Pre-treatment:
Scouring, boiling-off, and bleaching baths: 1.0 to 6.0 g/L 10% predilution of Athon FB 900 Antifoam.
Dyeing: Consult Bulletin
Finishing:
•Post-treatment and finishing liquors depending on liquor composition and process speed: 0.5 to 5.0 g/L 10% pre-dilution of Athon FB 900 Antifoam.
•Textile printing; (use of the concentrated product): 3.0 to 5.0 g/kg of pure Athon FB 900 Antifoam, as supplied, in the print paste.
Textile finishing
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 775 Antifoam is a 75% active polydimethylsiloxane based defoamer, forming clear solution with water at room temperature (rinsible).
•Athon FB 775 Antifoam is a 75% silicone antifoam active that is easy to disperse in water
•This product exhibits excellent long-lasting defoaming properties without spot formation. Athon FB 775 Antifoam is more active above 60°C
•It is important to shake and mix the product before use
Uses of Athon FB 775 Antifoam include: working metal fluids, cutting oils, textiles, cellulose and paper. Provides excellent anti-wear results in water-based metal working fluids, exhibiting excellent stability in high or low pH cleaning products.
Textile finishing
Thread manufacturing
Pulp & Paper
Household
Cutting oil
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 765 Antifoam is a 65% active silicone defoamer and antifoam.
Athon FB 765 Antifoam is an effective defoamer and defoamer for various water based industrial formulations and applications that require strong immediate defoaming action and also an extended antifoaming action.
Athon FB 765 Antifoam is used in formulations of graphite inks, water based inks and coatings in general, as well as in numerous industrial applications of water-based formulations with foam generation.
Typical levels of use are between 0.1% – 1.0% by weight based on the total formulation.
Product should be thoroughly mixed / shaken prior to use.
Paint & Ink
Coating
Agrochemical
Household
Autocare
Petrochemical
Industrial process
Water and waste treatment
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 700 Antifoam is an antifoam based on 100% active polydimethylsiloxane, forming clear solution with water at room temperature (rinsible).
Athon FB 700 Antifoam is a 100% active silicone defoamer that is easy to disperse in water. This product exhibits excellent long-lasting defoaming properties without spot formation. Athon FB 700 Antifoam is more active above 60°C.
Uses of Athon FB 700 Antifoam include: working metal fluids, cutting oils, textiles, pulp and paper. Provides excellent anti-wear results in water- based metal working fluids, exhibiting excellent stability in high or low pH cleaning products.
Textile finishing
Thread manufacturing
Pulp & Paper
Household
Cutting oil
Agrochemicals
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 550 Antifoam is a high efficiency antifoam emulsion with high Actives Contents.
•Sustained foam control
•Stable at high shear
•Stability for a wide range of pH and temperature conditions
•Ease of dispersion
•Excellent long-term efficiency
•High active material concentration
Athon FB 550 Antifoam can be used in numerous industrial processes where easy dispersion, high antifoaming efficiency, pH variations and high shear conditions are required.
Applications include: textile processes, pulp manufacturing and others.
Industrial process
Textile finishing
Thread manufacturing
Pulp & Paper
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 520 Antifoam is a silicone based antifoaming emulsion containing silica and additives. It can be used in a wide range of applications, being resistant to alkalis and acids and is recommended for processes under extreme pH conditions.
Athon FB 520 Antifoam is a homogeneous, low viscosity emulsion. It is effective even at very low levels, being chemically inert to the foaming medium. Excellent foam breaking as well as good residual action.
The versatility and ease of handling of Athon FB 520 Antifoam allow its use in the most varied applications. It is an excellent breaking agent of foam generated in formulations containing surfactants which are used in the most diverse areas such as agrochemicals, household cleaning products, Autocare, petrochemical industry, or where high performance in extremes of temperature, pH or resistance to saline or surfactant solutions is required. Typical levels between 0.1% and 2.0% are recommended although the ideal level should be established by practical tests. Dilution in water or in the foaming medium is recommended immediately prior to use.
Agrochemical
Household
Autocare
Petrochemical
Industrial process
Water and waste treatment
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 500 Antifoam is a compound based on organofunctional silicone fluids that exhibit high compatibility with organic systems.
Athon FB 500 Antifoam is a self-dispersing product, with the ability to spontaneously form a fine dispersion when added to water.
Athon FB 500 Antifoam is recommended for all organic systems that require a highly compatible antifoaming agent. Thus, it is ideal for applications where silicones would normally cause problems, such as water miscible adhesives and cooling lubricants.
It is particularly recommended for systems with a high surfactant content or involving high shear forces, such as the incorporation of pigments into dispersions. In these systems, purely organic defoamers rapidly become ineffective.
Athon FB 500 Antifoam also serves as an antifoam agent for suspensions rich in fine and strongly foaming particles and in the production of redispersible powders.
Household
Industrial process
Water and waste treatment
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 320 Antifoam is a silicone based antifoaming emulsion containing silica and additives. The product features excellent performance at low doses with high residual foam breaking power.
Athon FB 320 Antifoam is a homogeneous, low viscosity emulsion. It is effective even at very low levels, being chemically inert to the foaming medium. Excellent foam breaking as well as good residual action.
The versatility and ease of handling of Athon FB 320 Antifoam allow its use in the most varied applications. It is an excellent breaking agent of foam generated in formulations containing surfactants used in several areas where high performance in extreme temperature, pH or resistance to saline solutions is desired. Typical contents between 0.1% and 2.0% are recommended, although the ideal level should be established by practical tests. Dilution in water or foaming medium is recommended immediately prior to use.
Agrochemical
Household
Autocare
Petrochemical
Industrial process
Water and waste treatment
Agrochemicals
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 200 Antifoam is a silicone-based powder antifoam formulation.
•Suitable for a wide range of temperatures
•Excellent and lasting antifoam effect, optimum in laundry detergents
Athon FB 200 Antifoam is formulated to give effective release of the active ingredient at low temperatures, while maintaining the antifoam effect even at elevated temperatures. It is great for detergent formulations for low temperature laundry and universal laundry.
Other applications include various powdered products which are also susceptible to foam formation during use such as cleaning products and granular pesticides.
Household
Agrochemical
Agrochemicals
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 118 Antifoam is a medium viscosity silicone antifoam emulsion.
•Sustained foam control
•Stable at high shear
•Stability for a wide range of pH and temperature conditions
•Ease of dispersion
•Excellent long-term efficiency
Athon FB 118 Antifoam can be used in numerous industrial processes where easy dispersion, high antifoam efficiency, stable pH variations and high shear conditions are required.
Applications include: textile processes, pulp manufacturing and others.
Industrial process
Textile finishing
Pulp & Paper
Agrochemicals
Industrial processes
leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 110 Antifoam is a silicone based antifoaming emulsion containing silica and additives, presenting excellent resistance to alkalis and acids.
Athon FB 110 Antifoam is a homogeneous, low viscosity emulsion. It is effective even at very low levels, being chemically inert to the foaming medium. Excellent foam breaking as well as good residual action.
The versatility and ease of handling of Athon FB 110 Antifoam allows the use in the most varied applications. It is an excellent breaking agent for foam generated in formulations containing surfactants employed in the most diverse areas. It shows high performance in extreme temperature or pH means. Typical application levels between 0.01% and 1.0% are recommended although the ideal should be established by practical tests. Excellent foam breaking in water treatment systems.
Agrochemical
Household
Autocare
Petrochemical
Industrial process
Water and waste treatment
Agrochemicals
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 108 Antifoam is a 100% active, wide-spectrum antifoam compound.
•Easy to use due to low viscosity
•Features high resistance in alkaline environments, making it very versatile
Agrochemical industry, biotechnology, technical processes, fermentation, household cleaning products.
HOW TO USE:
Biological processes: Athon FB 108 Antifoam is added directly to the slurry in the feed tank at the end of the degassing process to suppress the foam and also to deaerate the slurry in the intermediate tank. Amounts generally used from 0.02 to 0.10%.
Formulation of powder detergents: Athon FB 108 Antifoam is added from 5 to 10% to a premixed powder. This premix is then added 2 to 5% to the powdered detergent at the end of the manufacturing process (final recommended product ratio: 0.2 to 0.5%)
Formulation of liquid detergents: Athon FB 108 Antifoam is added at the rate of 0.2 to 0.6% in formulations using thickeners.
Agrochemical
Industrial process
Antifoam
Household
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 101 Antifoam is a 100% active silicone antifoaming compound for use in different industrial applications.
•Effective in aqueous and organic solvent
•Used in low concentrations
Effective foam control in a variety of industrial processes, such as:
•Biological and microbiological processes
•Paper
•Textiles
•Agrochemicals
•Architectural paints & coatings
•PVC pastes and molding resins
•Asphalt manufacturing
The product is concentrated and must be dispersed in the foaming medium for effective action. Prepare 10% to 25% pre-dilutions in a diluent compatible with the medium and use immediately. Final concentrations of 50 to 100 ppm are generally used with good results.
Pulp & Paper
Textile finishing
Paint & Ink
Agrochemical
Release agent
Petrochemical
Agrochemicals
Industrial processes
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 794 Silane is a reactive chemical containing octyl functionality and 3 hydrolyzable ethoxide groups bonded to the silicon atom.
Athon CA 794 Silane has the n-octyl group, a highly hydrophobic hydrocarbon chain that provides excellent water repellency characteristics.
•Excellent improvement in dispersibility of mineral fillers
•Applicable to many natural mineral filler systems and organic polymers
•Very good water repellency on concrete, bricks, masonry substrates etc
•Very easily dissolved in various organic solvents and alcohols
Used to modify surfaces in the construction industry, such as concrete and masonry, forming a protective surface involving mineral particles. N-octyl groups also increase filler dispersibility in paints and organic polymers when used as surface treatment agents in mineral fillers. Athon CA 794 Silane can also be used to modify other surfaces, increasing compatibility with different substrates.
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Water repellent
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 789 Silane is a reactive chemical containing mercaptan functionality and 3 hydrolyzable methoxide groups attached to the silicon atom.
•Better adhesion between mineral fillers and sulfur- cured rubber, improving mechanical properties and moisture, abrasion and wear resistance
•Improved processability during compounding process with good inorganic fillers dispersion and agglomeration reduction
•Improves adhesion of polysulfide and polyurethane sealants to glass and metal surfaces
•Improves properties in products reinforced with mineral fillers, such as shoe soles, insulation of wires and cables and other rubber products
•Used in sulfur-cured and metal-oxide-cured elastomers. It can be added at the time of composition or used to treat mineral fillers previously
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 770 Silane is a reactive chemical containing a hydrophobic methyl group and hydrolyzable methoxy groups linked to the silicon atom.
Silane functionalized with hydrophobic methyl group and hydrolyzable methoxy groups. It has excellent characteristics of water repellency, rendering inorganic surfaces hydrophobic, and action as adhesion promoter.
•Curing agent for room temperature curing silicone rubber (silicone sealants)
•Coupling agent for fiberglass and silica
•Adhesion promoter in hybrid sealant formulations
•Used in surface hydrophobing product formulations
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Water repellent
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1947 Fluid is a high molecular weight silicone-polyether fluid.
•Athon SPE 1947 Fluid is used as an emulsifier, a spreading agent and surface tension reducer in various types of formulations
•Soluble in water and alcohol
•Good compatibility with PU
•Non-reactive
•Textile: spin-finishing additive, texturing oil, knitting oil
•Automotive and household products: brightness, compatible with water-based systems
•Pulp&Paper: improves defoaming performance in defoamers for brown stock
•PU Foam: additive for flexible foam preparation and for MDI compatibility with water
Textile finishing
Household
Autocare
PU foam
Pulp & Paper
Industrial Release Agents
Industrial Process
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1930 Fluid is a medium molecular weight silicone-polyether fluid.
Athon SPE 1930 Fluid is a dispersing agent, surface tension reducer, drainage aid, softener and dispersant used in various types of formulations in the chemical industry. It also improves gloss, lubricity, abrasion resistance, release, anti-blocking and other surface properties in textiles, coatings and other applications such as concrete, roof coatings, rubber etc.
•Textile: spin-finishing additive, texturing oil, knitting oil.
•Automotive and household products: gloss, slip, lubricity.
•Modification of polymers: co-reactant of polyester, isocyanate and epoxy resins – improves flexibility properties at low temperature, softness, elasticity, hydrophilicity, breathability and abrasion resistance of the finished materials.
•Promotes foam in aqueous solutions, stabilizing the air/water interface and allowing generation and stability of foams, in a much lower degree of foaming than anionic surfactants such as sodium lauryl ether sulfate.
Textile finishing
Household
Autocare
Household & Autocare
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1902 Fluid is a silicone-polyether fluid.
•Dispersible in water and soluble in alcohol
•Good PU compatibility
•Antistatic agent
•Leveling agent
•Non-reactive
•Lubricating effect
Athon SPE 1902 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations. Used in:
•Textile finishes
•Cleaners
•Waxes
•Polishers
•Car care
Textile finishing
Household
Autocare
PU foam
Industrial processes
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1901 Fluid is a silicone-polyether fluid.
•Soluble in water and alcohol
•Good PU compatibility
•Profoamer for PU foam coatings
•Leveling agent
•Non-reactive
•Athon SPE 1901 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations.
•Suitable for stabilizing PU foam for stable expanded coating and for use on most non-woven substrates
•Also used in textile finishing formulations, cleaners, waxes and polishes in household cleaning and car care products
Textile finishing
Household
Autocare
PU foam
Industrial processes
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1900 Fluid is a high molar mass, silicone-polyether fluid, finished with acethoxy group.
Athon SPE 1900 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations
•Soluble in water and alcohol
•Good compatibility with PU
•Profoamer for PU foam coatings
•Leveling agent
•Non-reactive
•Athon SPE 1900 Fluid is suitable for stabilizing PU foam in obtaining stable expanded coating and for use on most nonwoven substrates
•It is designed as a semi-durable hydrophilic treatment for nonwoven substrates, especially polyolefin-based materials
Textile finishing
Household
Autocare
PU foam
Industrial Release Agents
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon DBTDL is an organotin catalyst with a wide range of applications.
Athon AD 967 Additive is an organometallic salt based on tin, molecular formula C32H64O4Sn and molar mass 631.56 g/mol.
Used as a catalyst, among others, for applications:
•Sealants and adhesives
•Electric cables
•Elastomers of polyurethanes and silicones
•Isocyanate-based coatings
•Polyurethane foams
Adhesive and sealant
Rubber
Coating
PU foam
Paints and Varnishes
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 740 Silane is a reactive chemical containing epoxy functionality and hydrolyzable methoxy groups attached to the silicon atom.
•Epoxy-functional silane with hydrolyzable alkoxy groups
•The epoxy group, or glycidoxy group, is reactive with various types of organic polymers
•The alkoxy groups promote adhesion compatibility with inorganic surfaces
•Used as a coupling agent for unsaturated polyester-fiberglass composites
•Coupling agent for polysulfide / polyurethane sealants, eliminating the need for primer application
•Used as an adhesion promoter for water-based acrylic sealants and in epoxy and polyurethane coatings
•Compatible with a wide range of resins and fillers
Raw material
Paint, Ink & Coating
Adhesive and sealant
Paints and Varnishes
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 720 Silane is a reactive chemical containing diamine functionality and hydrolyzable methoxy groups attached to the silicon atom.
•Improves adhesion
•Increases modulus, tensile, flexural and dry compressive strength properties in composites
•Maximizes physical and electrical properties of thermoset and thermoplastic composites. Promotes improved wettability and dispersibility of fillers in the polymer matrix
•Coupling agent to improve adhesion in many plastics, resins and elastomers to inorganic surfaces and materials
•Excellent adhesion promoter by diamino-functional group in many types of adhesives, such as: silicone, epoxy, acrylic, polyurethane and silane-funcionalized polyurethane to inorganic substrates such as metal, glass, etc
•Superior coupling agent in composites and to improve the mechanical properties of rubber or plastics with mineral filler
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Industrial processes
Paints and Varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 700 Silane is a reactive chemical containing vinyl functionality and hydrolyzable methoxy groups linked to the silicon atom.
•Reagent for radical polymerization chemistry
•Reagent for hydrosilylation chemistry
•Undergoes siloxane-based crosslinking via moisture curing
•Binds to inorganic surfaces through alkoxy groups hydrolysis
•Coupling agent in charged rubber compounds
•Coupling agent in reinforced plastics
•Polyethylene crosslinking site
•Siloxane polymers synthesis reagent
Athon CA 700 Silane hydrolyzes when combined with water, forming silanol reactive groups with the release of methanol as a by-product. Vinyl functional groups may form chemical bonds with polymers or organic surfaces
Raw material
Paint, Ink & Coating
Adhesive and sealant
Rubber
Paints and Varnishes
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CA 769 Silane is a reactive chemical containing methyl functionality and 3 hydrolyzable methyl ethyl ketoxime groups bonded to the silicon atom.
Athon CA 769 Silane is a reactive substance used in the manufacture of oxime neutral cure silicone sealants.
Athon CA 769 Silane is used as a crosslinking agent for oxime cure sealants. It can be used alone or in combination with other oxime silanes to achieve specific properties (such as desired cure rate, adhesion, etc.)
In contrast to acid or base cure systems, no primary acid or amine is released during application, but a neutral species, 2-butanoneoxime.
Due to the neutral character of 2-butanoneoxime, oxime sealants can be applied even to corrosion-sensitive substrates such as metals or marbles.
Raw material
Adhesive and sealant
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
